PRODUCTS
  HVAC Analyser Guide
  Air Velocity
  Batteries & Fuses
  Carbon Monoxide
  Cases
  Combustion Analysers
  Clamp Meters
  Current Accessory Heads
  Data Logger
  Diode Accessory
  Field Packs
  Gauges - Digital Manifold
  Handles & Adaptors
  Humidity
  Insulation Tester
  Leads & Accessories
  Leak Detection - Combustion
  Leak Detection - Refrigerant
  Modular Heads
  Multimeters
  Pocket Instruments
  Pocket Tools
  Pressure
  RPM Meters
  Spare Parts
  Static Pressure
  Superheat & Subcooling
  Temperature
  Thermocouples
  Vacuum
  Voltage Accessory
  Weighing Scales
Product Search

 

SUPPORT
   Brochures/Flyers
   Software/Firmware
   Operations Manuals
   AAT3
 
SEMINARS
 

MEMBERS
 User:
 P/W:

[Regsiter!]
[Forgot your password?]
 
 

PRODUCTS
   Category: our product range >> Thermocouples >> Pipe Clamp K-Type Thermocouple - Code : ATC1 & ATC1R
Pipe Clamp K-Type Thermocouple - Code : ATC1 & ATC1R

The ATC1, K-type, pipe clamp thermocouple is used to take temperatures of pipes or any other cylindrical surface within its 9.5 to 35mm open jaw range. The ATC1R has a open jaw range of 3.0 t0 20mm. Using a pipe clamp thermocouple greatly facilitates taking superheat or subcooling measurements. The ATC1 or ATC1R can be used with any of our meters that measure temperature and any thermometer accepting a K-type thermocouple.

The sensor is virtually isolated from ambient conditions, allowing the thermocouple to read the true pipe temperature for as long as it is attached. The sensors large surface area and increased clamping force help the sensor reach the correct temperature within 30 seconds. Because the jaw is designed for HVAC/R, its clamping ability lets you measure temperatures of pipes that are fixed, at any angle, to walls or other surfaces

Specifications

  • ATC1 jaw opening 9.5mm to 35mm
  • ATC1R jaw opening  3.0mm to 20mm
  • Temperature Range -45 to 125C (both)
  • Accuracy: +/- 2C ; 0.5C after field calibration @ 0 to 80C
  • Max 125C (probe)
  • Tough single moulded hand grips
  • Plug: K-type thermocouple male mini plug.
  • Typical stabilization time: less than 30 seconds