PRODUCTS
  HVAC Analyser Guide
  Air Velocity
  Batteries & Fuses
  Carbon Monoxide
  Cases
  Combustion Analysers
  Clamp Meters
  Current Accessory Heads
  Data Logger
  Diode Accessory
  Field Packs
  Gauges - Digital Manifold
  Handles & Adaptors
  Humidity
  Insulation Tester
  Leads & Accessories
  Leak Detection - Combustion
  Leak Detection - Refrigerant
  Modular Heads
  Multimeters
  Pocket Instruments
  Pocket Tools
  Pressure
  RPM Meters
  Spare Parts
  Static Pressure
  Superheat & Subcooling
  Temperature
  Thermocouples
  Vacuum
  Voltage Accessory
  Weighing Scales
Product Search

 

SUPPORT
   Brochures/Flyers
   Software/Firmware
   Operations Manuals
   AAT3
 
SEMINARS
 

MEMBERS
 User:
 P/W:

[Regsiter!]
[Forgot your password?]
 
 

PRODUCTS
   Category: our product range >> Carbon Monoxide >> Carbon Monoxide Accessory - Code : ACM4
Carbon Monoxide Accessory - Code : ACM4

The CO accessory can be part of your kit, use it with our electronic handle and read carbon monoxide levels instantly. The Accessory Head is just right to use with the Electronic Handle as shown here or logging with our HG3 Analyser.

                                                Code: EHDL1

A must for all Gas Installers, Gas Plumbers and Service Technicians that need to check gas heating systems.

Use this instrument in and around the Office or Factory to check the CO levels. Meter is quick enough for "walk through" sensing inside heated zones.

Use the hand pump optional accessory to sniff our leakage sources.

Features

  • Each product comes with a Certificate of Conformity for Calibration traceable to National Institute for Standards & Technology [NIST] which is controlled by ISO-9001
  • Fast enough to find CO sources in 'Walk Around Mode'
  • Response time <70 secs to 90% of reading
  • 2 pin sensor for better performance & User replaceable
  • Auto-Off can be disabled for data logging
  • Select real time or average
  • Range: 0 to 1000 PPM (2000PPM with 5 minute max exposure time)
  • Accuracy: 0-35 PPM 5% reading 2 PPM after zeroing
  • Sensor type: Electromechanical (specific to CO)
  • Use optional pump (AOXP2) for remote / flue gas testing
  • Warranty two [2] years on meter - We do not warrant Sensors due to nature of use.
 

What's Included

  • Sensor cap for tube attachment
  • Calibration screw driver